Package Dimensions:
Length: 32.00 cm
Width: 24.00 cm
Height: 8.00 cm

Features

1、Fitment: Engine control module is replacement for EC380D Excavator, replacement for Mack MP8 FH13 Truck. OE numbers are 21107008, VOE21107008. 2、Improve Fuel Economy: The ECM board analyzes and controls the engine by receiving signals from sensors to achieve better fuel economy, reduce emissions and protect the engine. 3、Adaptive Control: The engine computer board can automatically adjust the engine working state according to different driving conditions and environment to ensure the best performance of the engine. 4、Strong Expandability: The board has rich functions and interfaces, which can communicate and integrate with other vehicle systems (such as transmission, ABS, in vehicle entertainment system, etc.) to realize the intelligent control of the vehicle. 5、Complete functions and strong expandability: the engine computer board has rich functions and interfaces, which can communicate and integrate with other vehicle systems (such as transmission, ABS, in vehicle entertainment system, etc.) to realize the intelligent control of the vehicle.

Package List

1 x Engine Computer Board

Package Dimensions:
Length: 31.00 cm
Width: 30.00 cm
Height: 16.00 cm

Item Type: RV Kitchen Sink
Material: 304 Stainless Steel
Sink Diameter: 10 Inches
Internal Depth: Approx. 120mm / 4.72in ( Manual Measurement, Slight Error May Exist )
Drain Pipe Diameter: Approx. 40mm / 1.57in ( Manual Measurement, Slight Error May Exist )
Tabletop Mounting Hole Diameter: Approx. 235mm / 9.25in ( Manual Measurement, Slight Error May Exist ) Embedded Installation
Application: Suitable for RV, Camper, Yacht, Boat, Kitchen and Other Scenarios.

Features

1、Stainless Steel: This RV kitchen sink is made of 304 stainless steel, the surface is processed by wire drawing process, has good wear resistance and rust resistance, not easy to deform or rust. 2、Easy to Clean: The surface of the sink is smoothing, easy to clean, just scrub with a brush or cloth, it can easily handle any cleaning work, equipped with sound insulation pad to reduce noise and vibration during use. 3、Modern Style: This round RV sink is processed by wire drawing process, adding modern style to your kitchen. 4、Wide Application: This camper sink is suitable for RV, camper, yachts, boat, kitchen and other scenarios. 5、Easy Installation: This stainless steel RV sink can be easily installed, saving your time and effort.

Package List

1 x RV Kitchen Sink 

1 x Rubber Pad

Package Dimensions:
Length: 60.00 cm
Width: 35.00 cm
Height: 22.00 cm

Features

1、Vehicle Fitment: Replacement for Benz C‑Class W204 facelift 2011‑2015. Please confirm whether your model is applicable before buying. 2、Multi Functional: Rear brake light has multifunctions, including LED red running light, LED red brake light, LED amber turn signals, LED white reverse light. 3、Improved Visibility and Safety: The LED tail lights offers improved visibility, making your vehicle stand out on the road, increasing your driving safety. 4、Long Lifespan: Rear light lens is finely crafted, impact resistant, with superior heat dissipation to prolong the service life of the lamp. 5、Plug and Play: LED rear lamp is quick and easy to install, no wiring or coding, direct bolt on OE fitment or replacement for the stock unit.

Package List

1 x Tail Lamp

Package Dimensions:
Length: 37.00 cm
Width: 20.00 cm
Height: 15.00 cm

Item Type: Electric Motorcycle Battery Box

Size: Approx. 190 x 190 x 310mm / 7.5 x 7.5 x 12.2in 
Application: Universal product, suitable size can be installed

Features

1、Portable: The portable design makes the battery case easy to carry, whether you need to replace the battery or charge it, it is easy to carry and easy to use. 2、Durable Plastic: Made of durable plastic material, battery box has high strength, can effectively protect the battery from external impact and damage. 3、Good Sealing: The battery box has good sealing performance, which can effectively prevent water or dust from entering and protect the battery from corrosion and damage. 4、Capacity: With a size of 7.5 x 7.5 x 12.2in, The battery case has enough space for the battery as well as other accessories, please check the size before purchasing. 5、Safe Storage: A battery box provides a secure and safe environment for the battery, protecting it from potential risks such as impact, vibration, weather elements.

Package List

2 x Battery Box Accessories

Package Dimensions:
Length: 19.00 cm
Width: 12.00 cm
Height: 7.00 cm

Item Type: Tail Light Harness

OE Number: 16531401, 16531402

Material: ABS

Fitment:

Replacement for Chevy Silverado 1500 Tail Light Wiring Harness 2003-2006
Replacement for Chevy Silverado 1500 Classic Tail Light Wiring Harness 2007
Replacement for Chevy Silverado 1500 HD Tail Light Wiring Harness 2005-2006
Replacement for Chevy Silverado 1500 HD Tail Light Wiring Harness 2003
Replacement for Chevy Silverado 1500 HD Classic Tail Light Wiring Harness 2007
Replacement for Chevy Silverado 2500 HD Tail Light Wiring Harness 2003-2006
Replacement for Chevy Silverado 2500 HD Classic Tail Light Wiring Harness 2007
Replacement for Chevy Silverado 3500 Tail Light Wiring Harness 2003-2006
Replacement for Chevy Silverado 3500 Classic Tail Light Wiring Harness 2007

Features

1、OE Number: The referencing OE number of this tail light harness are 16531401, 16531402, which is molded and designed depend on the original data. 2、Fitment: The rear tail light wiring harness is a replacement for Chevy Silverado 1500 2500 3500, please check the model before ordering. 3、Precision Manufacturing: The wiring harness is manufactured with precision to ensure the quality, stability and electrical performance of the wiring harness. 4、Ideal Replacement: Direct replacement installation, meets or exceeds OEM standards for the replacement of old and damaged one on original vehicles. 5、Easy to Install: Stringently manufactured to meet the original standard, easy to install, no modification, cutting, or drilling required.

Package List

1 x Pair of Tail Light Harness (Left Right)

Package Dimensions:
Length: 17.00 cm
Width: 13.00 cm
Height: 7.00 cm

Features

1、Made of 201 stainless steel of high quality, with quality assurance. 2、Good corrosion resistance and wear resistance, high hardness and durability. 3、Suitable for all exhaust/ turbine/ inter‑cooler/ intake pipe connections. 4、Built to meet standard specification, and strictly follow factory quality control. 5、Precision manufacturing ensures stable performance and long service life.

Package List

1 x Exhaust Pipe Adapter

Package Dimensions:
Length: 9.00 cm
Width: 8.00 cm
Height: 2.00 cm

Specification

• The product is made of flame-retardant material, which is fire-proof and safer to use.
• The product effectively helps to keep the engine clean.
• Absorbing mater cylinder and cluth reservoir tank leaks.
• Easy to install and use.
• The product is a general type of accessories, which can be applied to all types of automobiles.

Features

1、The product is made of flame-retardant material, which is fire-proof and safer to use. 2、The product effectively helps to keep the engine clean. 3、Absorbing mater cylinder and cluth reservoir tank leaks. 4、Easy to install and use. 5、The product is a general type of accessories, which can be applied to all types of automobiles.

Package Dimensions:
Length: 25.00 cm
Width: 9.00 cm
Height: 7.00 cm

Item Type: Truck Combination Switch
Material: ABS
OE: 3944025
Interchange Part Number: 20399170, 20479584, 20701049, 20797838, 3944025, 978-5501
Fitment: Replacement for VNL VNM Truck 2005‑2012

Features

1、Replacing OE number for reference: 3944025, replacement for VNL VNM Truck 2005‑2012. 2、Adopt superior ABS material, sturdy, corrosion resistant and durable, ensures long lifespan. 3、Can be installed quickly, does not require complicated operations, convenient for using. 4、Original standard, it can directly replace the old or damaged truck combination switch. 5、Manufactured to meet standard specification, strictly follow factory quality control.

Package List

1 x Truck Combination Switch

Package Dimensions:
Length: 13.00 cm
Width: 11.00 cm
Height: 3.00 cm

Features

1、Function: The car emulator could move the original immobiliser signal, place the original immobiliser signal, enable the car to start, eck the ezs, correctness of the SRS system. 2、Feature: The vast majority of programs can be used multiple times. Program selection is effected by soldering jumpers from J1 to J7. To connect the emulator, please refer to CD. 3、Program: The emulator comes with 68 programs that are dedicated to hundreds of car models and types of ECU, you can choose from immo, seat occupancy sensor tacho programs. 4、Fine Workmanship: Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability. 5、Practical: This car simulator is simple to operate, fast and responsive, high accuracy, can effectively simulate car parts, to achieve the purpose of effective diagnosis.

Package List

1 x Car Emulator

1 x Harness

1 x CD

Package Dimensions:
Length: 5.00 cm
Width: 2.00 cm
Height: 2.00 cm

Item Type: Transmission Pressure Switch
Material: Aluminium Alloy
OEM: 28600-P6H-003, 28600-P6H-013, 28600-RCL-013
Fitment:
For Honda ACCORD 98 - 02
For Honda ACCORD 2DR EX
For Honda ACCORD 2DR LX
For Honda ACCORD 4DR DX
For Honda ACCORD 4DR EX-UL
For Honda ACCORD 4DR EXL
For Honda PRELUDE 97 - 01
For Honda PRELUDE 2DR BASE
For ACURA CL 98-99

Features

1、Made on the basis of the original specification, really suitable for Honda ACCORD 4DR DX. 2、The reference part number is 28600‑P6H‑003, 28600‑P6H‑013, perfect match for the car. 3、Engineered from high‑quality aluminium alloy materials to improve reliability and durability. 4、Direct replacement on the market for your old and broken transmission pressure switch. 5、Easy to install, direct replacement, plug and play, cheap and cheerful, you can use it for a long time.

Package List

1 x Transmission Pressure Switch

Package Dimensions:
Length: 34.00 cm
Width: 8.00 cm
Height: 6.00 cm

Item Type: Short Throw Shifter
Material: Metal
Part Number: WX-5350
Fitment:
Fit for Forester F4 SF5 1997-2002 - 5 Speed
Fit for Impreza 1996-2005 WRX - 5 Speed
Fit for Impreza 2001 - 2006 -FOR STi 7 -FOR STi 8 - 5 Speed
Fit for Legacy BC5 BF5 1997-2004 - 5 Speed

Features

1、Reducing gear throws by 40%, which can provide faster and more direct gear selection to achieve smooth and precise gear changes. 2、Including stainless steel stick assembly and spherical pivots, and CNC machined aluminum mounts with roller bearings. 3、CNC‑processed anodized aluminum bracket, equipped with roller bearings for high mileage. 4、CAD design for precise gear selection. Designed specifically for motorsports, it is ideal for hard driving and off‑road racing. 5、All this is combined with a simple straightforward installation. Direct bolt-on installation, without complicated operations.

Package List

1 x Short Throw Shifter

1 x Adapter

2 x Gaskets

2 x Sleeves

Package Dimensions:
Length: 24.00 cm
Width: 20.00 cm
Height: 15.00 cm

Item Type: Front Right Brake Calipers

OE Number: 34116776784

Material: Metal

Piston Diameter: Approx. 60mm/2.36in
Applicable Brake Disc Thickness: Approx. 30mm/1.18in
Applicable Brake Disc Diameter: Approx. 348mm/13.70in

Fitment:

Fits for X5 E70 2007-2013 L6 3.0L Front Left excluding M Models
Fits for X5 E70 2007-2010 V8 4.8L Front Left excluding M Models
Fits for X5 F15 2013-2018 L6 3.0L Front Left excluding M Models
Fits for X5 F15 2016-2018 L4 2.0L Front Left excluding M Models

Features

1、OE Number: The referencing OE number of this front right brake caliper is 34116776784, which is molded and designed depend on the original data, and maintaining the original car model. 2、Fitment: The front brake caliper set is a replacement for X5 E70 X5 F15 X6 E71, please check the model before ordering to confirm compatibility. 3、Ideal Replacement Part: Ideal for refurbishing or replacing aging, damaged brake calipers on your vehicle, and restoring optimal brake performance. 4、Superior Functionality: The quality construction ensures excellent stopping power and improved safety, making your vehicle safer. 5、Easy Installation: The brake calipers are ready for direct replacement, eliminating the need for any modifications for a hassle free installation.

Package List

1 x Front Right Brake Caliper Set (2 Pcs)

Package Dimensions:
Length: 47.00 cm
Width: 27.00 cm
Height: 5.00 cm

Item Type: Tool Storage Bag

Material: 1680D double stranded oxford fabric

Product Specification: 18 inches
External Pockets: 5
Color: Blue black
Functions: Convenient to store a variety of tools, easy to carry, access and layout is very reasonable, help you faster, better, safer, more convenient to complete the task.

Features

1、Multiple Pockets: This heavy duty tool bag has multiple pockets for easy storage of a variety of tools that help you get the job done faster, better, safer, and more easily. 2、Easy Access: This storage bag features an open top design with large space for easy access to your tools and parts. 3、Comfortable Handle: Upgraded carrying handle add extra comfort when carrying heavy loads and allow for safe and secure transport. 4、Sturdy Zipper: High strength and flexible zipper is convenient for you to close and open the bag, bringing you a reliable use experience. 5、Application: Heavy duty tool bag is made of durable and waterproof 1680D oxford fabric, it is ideal for the home, workshop or workplace.

Package List

1 x Tool Storage Bag

Package Dimensions:
Length: 9.00 cm
Width: 7.00 cm
Height: 5.00 cm

Item Type: RV Toolbox Handle Latch
Material: Cold Rolled Steel, Galvanized Steel
External Size: Approx. 84 x 68mm/3.3 x 2.7in
Installation Hole Size: Approx. 70 x 53mm/2.8 x 2.1in
Door Thickness: Approx. 3-12mm/0.1-0.4in
Application Scenes: Easily replace damaged or worn latches, used for RVs, trucks, trailers, mobile machinery shops, camper, tool boxes etc.

Features

1、Durable Material: The trailer paddle door lock is made of stainless steel with mirror polished surface, rust resistant, can cope well even in harsh outdoor environments. 2、Smooth Operation: The RV toolbox handle latch is smooth to operate and non jamming to use, convenient for daily operation, durable and practical. 3、Easy to Install: The toolbox lock handle has a simple built in installation, convenient and time saving, don't need too much tools or complicated steps. 4、Ideal Replacement: The lock handle latch is a perfect replacement for repairing, can directly replace the old and broken accessory, ensuring the normal operation of your trailer. 5、Wide Application: Trailer paddle door latch handle has wide range of uses, can be used for RVs, trucks, trailers, mobile machinery shops, camper, tool boxes, etc.

Package List

1 x RV Toolbox Handle Latch

Package Dimensions:
Length: 15.00 cm
Width: 11.00 cm
Height: 4.00 cm

Specification

• Made of high quality ABS material, tough, high  rigidity and collision resistance.
• Increase ignition energy strength for easy starting and smooth riding.
• High performance coils that meet or exceed OEM specifications.
• A great replacement for your old or broken one.
• Easy to install, reliable to use.
• Fit for Virago XV125, for Virago XV250, for V-Star 250cc.

Features

1、Made of high quality ABS material, tough, high rigidity and collision resistance. 2、Increase ignition energy strength for easy starting and smooth riding. 3、High performance coils that meet or exceed OEM specifications. 4、A great replacement for your old or broken one. 5、Easy to install, reliable to use.

Package Dimensions:
Length: 33.00 cm
Width: 32.00 cm
Height: 11.00 cm

Item Type: Condenser Electric Cooling Fan

Material:  ABS+ iron

Color: Black

Round Frame Diameter: Approx. 305mm/12.01in
Blade Type: Straight five leaf blowing wind
Power: 160W
Voltage: 24V
Application: Bus, truck

Features

1、Function: Improved heat dissipation throughout the engine compartment, including radiator, air conditioning system, intercooler, oil system and transmission. 2、Unique Design: For any application, the motor can be easily reversed, and the unique fan blade design allows you to pull or push air at the same speed. 3、Cooling Fan Design: 5 blades design, 160W high power, provide better heat dissipation performance, low power consumption and low noise when working. 4、Slim Design: The slim design makes it ideal for installation in tight areas, offers excellent compartment clearance that is not limited by the size of the mounting position. 5、Fine Workmanship: Professional manufactured, ensure stable performance and high reliability, the 24V working voltage is suitable for buses, trucks, etc.

Package List

1 x Air Conditioner Cooling Fan

Package Dimensions:
Length: 6.00 cm
Width: 5.00 cm
Height: 3.00 cm

Features

1、Specially designed to fit for Mercedes‑Benz C W204 / GL X164 / ML W164 / R X164 Type1. 2、Small size but with very good effect, has strong stability, saving your time and effort. 3、The main function is to reactivate the SRS function for safety, which has high practicability. 4、Easy to use and quick to install, and will not take up much of your time, very convenient. 5、After installation, it will send a seat occupancy signal to OBC regardless of whether someone is sitting on the car seat

Package List

1 x Seat Occupation Sensor Emulator

Package Dimensions:
Length: 26.00 cm
Width: 23.00 cm
Height: 8.00 cm

Item Type: Automotive Circuit Test Leads Kit
Material: ABS+ metal
Function: Mainly used to simulate the sensor signal, observe the change of data flow, so as to determine the quality of the line, and at the same time can simulate the signal of the temperature exhaust sensor to test the quality of the urea pump.
Circuit Detection Type:
Connect wires to the multimeter detection circuit
Diode test lamp
Main Types of Analog Sensors:
1. Pressure sensor
2. Rail pressure sensor
3. Oil pressure sensor
4. Inlet pressure sensor
5. Urea pump pressure sensor
6. Water temperature sensor
7. Inlet air temperature sensor
8. Oil temperature sensor
9. Fuel temperature sensor
10. Urea pump temperature sensor
11. Urea pump level sensor
12. Post treatment temperature exhaust sensor

Features

1、Integrated Design: The automotive circuit test leads Kit integrates multiple functions into one device, reducing the number of tools you need to carry. 2、Reliability and Accuracy: The leads kit could accurately simulates sensor signals and observes changes in data flow, ensuring you can diagnose and solve problems quickly and accurately. 3、Multifunctional: Mainly used to simulate the sensor signal, observe the change of data flow, so as to determine the quality of the line, and simulate the signal of the temperature exhaust sensor. 4、Wide Applications: Whether you're a professional in a vehicle repair shop or diagnosing vehicles at home, the multifunctional automotive circuit test leads can meet your needs. 5、Storage Box: Pack includes heavy duty carrying case with handle for easy transportation, safe storage, and quick organization, and prevents parts from getting lost.

Package List

2 x Wire Barb

2 x Diode Test Lamp

2 x Connecting Cable (1.5 Meters)

2 x Potentiometer (1KΩ)

1 x Potentiometer (5KΩ)

1 x Potentiometer (50KΩ)

34 x Common Resistance (2kq 1/2w)

37 x 5A 10A 15A 25A Fuse

1 x Instruction Manual

1 x Box

Package Dimensions:
Length: 9.00 cm
Width: 5.00 cm
Height: 2.00 cm

Features

1、It can help you to fixed your motorcycle handlebar mirror. 2、Easy to install and convenient to carry. 3、Directly clamp on fits 7/8in standard handlebar. 4、Made of high quality aluminum,tough and durable,you can use it for a long time. 5、Customize your ATV, UTV, GO CART, DIRT BIKE, DUAL SPORTS BIKE, BUGGY.

Package Dimensions:
Length: 26.00 cm
Width: 13.00 cm
Height: 10.00 cm

Item Type: Car Seat Trim

Material: Dry carbon fiber

Installation Mode: Paste installation

Applicable Model: Left and right hand drive universal

Fit for GR86 2022+

Replacement for Subaru BRZ 2022+

Features

1、Fitment: Car seat trim is fit for GR86 2022+, replacement for Subaru BRZ 2022+, which is made according to the prototype of the car. 2、Delicate Appearance: The trim can improve the monotonous interior your original car, making your car look both cool and high end luxury. 3、Exquisite Texture: Symmetrical and uniform texture, smooth and glossy surface, high precision to meet your use needs. 4、Colorfast Design: Dry carbon fiber material, excellent surface finish, high heat resistance, and UV resistant, not easy to fade, cracking. 5、Scratch Protection: Effectively protects your car seats from damage and keeps your car's interior looking new at all times.

Package List

2 x Car Seat Trim

Package Dimensions:
Length: 34.00 cm
Width: 23.00 cm
Height: 20.00 cm

Item Type: Motorcycle Rear Luggage Rack

Material: Iron

Functioin: The rack ensures extra storage space for carrying extra items on the go!

Fitment: Fit for DAX125 ST125 2021‑2023

Features

1、Applicable Models: Motorcycle rear cargo rack is fit for DAX125 ST125 2021‑2023, please confirm whether your model is applicable before buying. 2、Increased Storage Space: Provides additional storage space for your motorcycle, allowing you to carry luggage and essentials with ease. 3、Black Coating: The rack is treated with a black coating, offering resistance to fading and rust. Enhances the overall aesthetics of your motorcycle. 4、Premium Iron: Made from high strength iron materials, ensuring the rear luggage rack is sturdy, strong, and wear resistant, providing long lasting durability. 5、Easy Installation: The kit comes with all the necessary accessories for easy and quick installation. No drilling or cutting required, eliminating the need for complicated modifications.

Package List

1 x Rear Luggage Rack

5 x Screw  

2 x Nut 

2 x Gasket 

2 x Bushing

1 x Auxiliary Bracket

Package Dimensions:
Length: 23.00 cm
Width: 13.00 cm
Height: 6.00 cm

Features

1、Smart Key: Frame made of zinc alloy, feel smooth, strong metal, high durability. 2、Ultra Long Standby Time: Standby for 100 days, keyless entry for 200 days, physical keys for 365 days, one time charging, and long term use. 3、Keyless Entry: When the owner approaches the car with the key, the door lock will open automatically; When the owner leaves the car, the door lock will automatically close. 4、Window Lifting: Some models can be set with the function of automatically lifting the window after locking. The function can only be set if the original vehicle has this function. 5、Phone Number Page: You can set the contact information of the owner. When the key is lost, the person who finds it can contact the owner to return the key.

Package List

1 x Smart LCD Key

Package Dimensions:
Length: 18.00 cm
Width: 14.00 cm
Height: 13.00 cm

Features

1、OEM part number for reference: F6RZ-7G391A, R96420A, XS7P-7G391-AA. 2、Especially fit for Ford Mondeo (up to for Mondeo III 4 cylinder model) 1995–2007. 3、Professional manufacturing, exquisite workmanship, long service life. 4、Construed of high quality components, which is tested for reliability, durability and performance. 5、Super quality automotive replacement parts, which meet professional factory specifications and perfectly match your original vehicle.

Package List

Package Dimensions:
Length: 37.00 cm
Width: 16.00 cm
Height: 7.00 cm

Item Type: Car Sun Visor
Applicable Models:
Replacement for Toyota Corolla 2007-2013

Features

1、Applicable Model: The sun visor is replacement for Toyota Corolla 2007 to 2013. Please confirm whether your model is consistent before buying to avoid unnecessary return. 2、Enhanced Sun Protection: The sun visor offers effective sun protection, shielding you from UV rays while driving, ensuring maximum coverage and blocks out glare, providing a safer and more comfortable driving experience. 3、Durable and Reliable: Crafted from premium materials, this sun visor mirror is built to last, resistant to fading, cracking, and deformation, ensuring long term durability and functionality. 4、Elegant and Practical Design: The sun shielding visor mirror features an elegant design that complements the interior of your car. Its beige color adds a touch of stylish and enhancing the overall aesthetics. 5、Easy Installation: Designed as a direct replacement for the original visor, this sun visor makeup mirror ensures a precise fit without any modifications. The installation process is straightforward and hassle free, requiring no special tools or professional assistance.

Package List

1 x Car Sun Visor

Package Dimensions:
Length: 31.00 cm
Width: 31.00 cm
Height: 12.00 cm

Item Type: Aluminum Differential Cover
Screw Pattern: 10 Screw
Screw Size: 5/16in - 18 x 1in
OE Number: HRCGM85BK
Fitment:
Fit for Intermediates 1964-1995 (all A-B-C-G-K-0 Axles)
Fit for 1/2 Ton 2WD / 4WD Rear 1964-1987 ( Will Not Fit for 64-70 Trucks with Leaf Springs)
Fit for 1500 2WD and 4WD 1/2 ton trucks 1988-2002 (rear)
Fit for Jimmy 2WD and 4WD 1988-1992 (rear)
Fit for 2WD and 4WD 1/2 ton 1988-1999 (rear)
Fit for 2WD and 4WD 1994-1999 (rear)
Fit for 1500 1/2 Ton 2WD / 4WD with 8.5 R.G Rear 1999
Fit for 1500 1/2 Ton 2WD / 4WD with 8.5 R.G Rear 1988-1999
Fit for Z28 and Iroc with 8.5in ring gear 1988-1999
Fit for V8 1993-2002 (will not fit heavy duty)
Fit for V8 engines 1993-2002
Fit for Monte Carlo SS 1983-1987
Fit for Old 442 with 8.5in ring gear 1983-1987
Fit for Apollo 1973-1975
Fit for Electra 1971-1989
Fit for Regal 1973-1987
Fit for Skylark 1964-1979
Fit for Wildcat 1964-1970
Fit for Bel Air 1964-1975
Fit for Biscayne 1964-1972
Fit for C10 Pickup 1979-1986
Fit for C1500 Pickup 1988-1999
Fit for C2500 Pickup 1989-2000
Fit for Caprice 1966-1996
Fit for Express 1500 1996-2014
Fit for G10 1979-1995
Fit for G20 1975-1995
Fit for Impala 1964-1996
Fit for K10 Pickup 1979-1986
Fit for K1500 Pickup 1988-1999
Fit for K5 1979-1986
Fit for Malibu 1964-1983
Fit for Nova 1969-1979
Fit for S10 1994
Fit for S10 Pickup 1994-2004
Fit for 1500 1999-2008
Fit for G1500 1979-1995
Fit for G25 1978
Fit for G2500 1979-1995
Fit for Jimmy 1994-2005
Fit for 2500 1996-1998
Fit for Sonoma 1994-2004
Fit for Typhoon 1992-1993
Fit for XL 1500 2000-2013
Fit for Cutlass 1970-1977
Fit for Omega 1973-1979
Fit for Catalina 1970-1981
Fit for Grand Prix 1971-1987
Fit for Lemans 1971-1981
Fit for Phoenix 1978-1979
Fit for Tempest 1964-1970
Fit for Ventura 1971-197

Features

1、Applicable Model: The aluminum differential cover is for 1500 Monte Carlo Bel Air Biscayne C10 C1500 C2500 Caprice Express G10 G20 Impala K5 K10 K1500 Malibu Nova S10, for Apollo Electra Regal Skylark Wildcat, for Jimmy G1500 G25 G2500 Sonoma Typhoon, for Cutlass Omega, for Catalina Grand Prix Lemans Phoenix Tempest Ventura. 2、OE Number: The part number for reference is HRCGM85BK. Please confirm whether it is consistent with the OE you need to avoid wrong buying and other problems. 3、Lightweight Aluminum Design: The differential cover features a lightweight design to reduce vehicle weight, enhance performance, and fuel efficiency. 4、Stylish Look and Rust Proof: The car differential cover features a fashionable and stylish appearance, providing extra rust protection, and extending the lifespan. 5、Easy Installation: Suitable for general differential maintenance and upgrades, the differential cover replacement is simple and convenient to install without the need for professional tools or skills.

Package List

1 x Differential Cover
1 x Sealing Gasket
10 x Screws
10 x Washers

Package Dimensions:
Length: 24.00 cm
Width: 18.00 cm
Height: 4.00 cm

Features

1、This mirror replaces your broken or missing heated mirror glass to keep you safe while driving. 2、Exactly the same size as the . 3、Replacement for Dodge Ram 1500 2500.

Package List

1 * Exterior Mirror Glass (Left)

Package Dimensions:
Length: 84.00 cm
Width: 8.00 cm
Height: 8.00 cm

Item Type:  Electric Tailgate Lift Strut
Material: ABS + Metal
Position: Rear Tailgate
Fitment: 

Fit for RAV4 2.5L A/T Limited (VIN: 2,J) 2018
Fit for RAV4 2WD LIMITED (VIN: 2,J) 2015, 2016, 2017
Fit for RAV4 4WD LIMITED (VIN: 2,J) 2015, 2016, 2017
Fit for RAV4 2WD Outdoor Limited 2015
Fit for RAV4 2WD Premium Limited 2015
Fit for RAV4 2.5L Limited (VIN: 2,J) 2013, 2014
Fit for RAV4 2.5L A/T SE (VIN: 2,J) 2018
Fit for RAV4 2WD SE (VIN: 2,J) 2016, 2017
Fit for RAV4 4WD SE (VIN: 2,J) 2016, 2017
Fit for RAV4 2WD SE 2015
Fit for RAV4 2.5L A/T XLE (VIN: 2,J) 2018
Fit for RAV4 2WD XLE (VIN: 2,J) 2015, 2016, 2017
Fit for RAV4 4WD XLE (VIN: 2,J) 2015, 2016, 2017

Features

1、Applicable Model: Electric tailgate lift strut is replacement for RAV4 2013‑2018, please confirm whether your model is applicable before buying. 2、Material: Manufactured with ABS and metal materials and advanced processes, the tailgate lift strut has excellent durability and can withstand long use and harsh weather conditions. 3、High Load Capacity: The tailgate shock strut is made of high strength material with excellent stability and load capacity, ensuring the safety of the door when it is opened, avoiding accidental closing or shaking. 4、Perfect Fit: This electric tailgate lift strut can be effortlessly integrated into your vehicle's existing setup, without any major modifications required. 5、Easy to Install: The electric tailgate strut fits perfectly with your car, and installation requires no changes and professional technology, which is convenient, quick and time saving.

Package List

1 x Electric Tailgate Lift Strut  
2 x Accessories

Package Dimensions:
Length: 13.00 cm
Width: 8.00 cm
Height: 5.00 cm

Item Type: Accelerator Brake Pedal Set
Material: Aluminium Alloy + Rubber
Fitment: Replacement for Accord 10 2018‑2021

Features

1、Perfect Fitment: The Accelerator Brake Pedal Set is an ideal replacement for Accord 10 2018‑2021 to well and truly meet your needs, bring you more convenience. 2、Premium Material: Made of aluminium alloy and rubber, not easy to fall off or separate which enhance pedals contact surface for improved driving experience and safety factor. 3、Safe Experience : The superior pedals will bring you a better driving experience and improve the security of driving on rainy days. Even with flat shoes, the pedals are well controlled. 4、Anti Slip Surface: Non‑slip rubber surface adds friction and strengthens the friction coefficient, provide a more secure driving position with a firm place for your foot. 5、Easy to Install : You can directly replace the old without drilling or welding. Pay attention to whether the size of your car pedal is consistent with the size of the product before purchasing.

Package List

1 x Accelerator Brake Pedal Set (2PCS)

Package Dimensions:
Length: 0.00 cm
Width: 0.00 cm
Height: 0.00 cm

Specification

• Material: Plastic
• For smoothly finishing joints with silicone and acrylic sealant
• For cleaning and smoothing joints
• Easy to clean
• For most edges and radii
• 45° flat profiles: Width 6/8/10/12/15 mm
• Round profile: R 7/10.5/14.5 mm
• Delivery includes: 4 x joint smoother
• Material: Plastic
• For smoothly finishing joints with silicone and acrylic sealant
• For cleaning and smoothing joints
• Easy to clean
• For most edges and radii
• 45° flat profiles: Width 6/8/10/12/15 mm
• Round profile: R 7/10.5/14.5 mm
• Delivery includes: 4 x joint smoother

Package Dimensions:
Length: 19.00 cm
Width: 19.00 cm
Height: 14.00 cm

Item Type: Cylinder Piston Gasket Top End Kit

Material: Metal

Reference Part Number: A12101146000, A12251117000, A12191117000, A9100107128, A9405007000, 278002223, A13100146000, A13111117000, A13011146000, A13115101000, A12201117000

Cylinder Bore Size: Approx. 52mm/2.04in
Cylinder Bore and Stroke: Approx. 52.00mm x 41.90mm/2.04x1.64in
Cylinder Displacement 89cc / Compression 6.6:1

Application: Replacement for Polaris Predator 90 2003‑2006

Features

1、Applicable Models: Cylinder piston kit is replacement for Polaris Predator 90 2003‑2006, please check carefully to make sure it is compatible with your vehicle. 2、Part Number: The referencing part number of the kit are A12101146000, A12251117000, A12191117000,A9100107128, A9405007000, 278002223, A13100146000, A13111117000, A13011146000, A13115101000, etc. 3、High Performance: The cylinder can work reliably under harsh conditions, effectively improving the engine displacement and performance! Increase horsepower and torsion! 4、Long Durability:: The cylinder kit is made of metal materials, with high strength, not easy to deform, strong impact resistance, reduced engine vibration and making driving more stable. 5、Ideal Replacement: Simple operation and easy control, used to replace the old and damaged one of the original vehicle to improve the riding experience.

Package List

1 x Cylinder Piston Kit(19PCS)